iFlight
iFlight SucceX-D Whoop V3.2 AIO Board – F4 FC + 20A BLHeli_S ESC (MPU6000)
Availability
Catalog only
Last seen 26 Mar 2026, 5:18 pm
Part number
Catalog only
Normalized against the v5 schema baseline.
Product specifications
Sd Card
No
Mcu Chip
stm32f411
Osd Type
none
Barometer
none
Dual Gyro
No
Mcu Family
f4
Uart Count
0
Built In Rx
No
Built In VTX
No
ESC Firmware
blheli_s
I2c Available
No
Has Inverter Pad
No
ESC Channel Count
4
Max Input Voltage
16.8
Min Input Voltage
7.4
Continuous Current A
20
Battery Connector Type
xt30
Compatibility & Build Notes
Build note 01
20A per-channel current handling is a fast way to sanity-check the motor and prop load this board can support.
Build note 02
Power input is published for 7.4V to 16.8V, so make sure your cell count and battery plan stay inside that band.
Build note 03
XT30 power handling means your battery lead and build wiring should match this connector family.
Build note 04
0 available UARTs gives you a rough budget for receiver, GPS, VTX control, and other serial accessories.